4/20/2024 0 Comments 2008 yamaha r1 ecu flashIf you want to know anything else just ask. So you don't need a PC3 to make fuel changes. you just need to bring a copy of the software with you to the dyno so the operator can change settings. And it does allow for fuel mapping on a dyno. Similar to PC3 software just not as flashy and more purposeful. I just know you lose the speedo If you don't ask him to retain the stock gauge functions. You do have to ask him to program it that like that though because they come as a YEC clone where the speedo turns to a temp gauge and the odo is an hour meter or something. Only difference is the kickstand saftey switch will no longer work and the headlights turn on when you turn the key on instead of when the engine starts. Yes the fans and everything still work just as It has the stock ecu. If I didn't have them I wouldn't have bought them to use with along with the ecu. I have a pc3 and igntion module stacked on top of the ecu because the fuel and ignition mapping has more adjustability then the YEC ecu and I already had them. You have to turn off the quickshifter to keep your bike from cutting out at the programmed rpm for the shift. I'll give you the email address to get ahold of the guy. I'm gonna get it to the dyno in the next couple weeks.Īnyone who wants one let me know. But I did notice that for the PC V you can actually hook up a Wideband to it now, to that takes care of that. But dont forget that we need to be able to LOGG the bike as well inorder for all of this to work. It still needs to be tunned really badly though. I would really like to know what software that Ebay guy is using to flash the ECU. I love it! It makes the R1 like its supposed to be. This is one of the best things I bought for my bike. I can alreadsy tell a big difference at low rpms. I just had to unplug 3 wires from the main harness and connect the 2 wires to the harness for the programing wire and hook up a ground to the battery and thats it. There are a number of options such as a quickshifter, fuel/ign tuning, YCCT tuning, EXUP and AIS disable and speedometer correction. On a more serious note you can definitely utilize the FlashTune interface. Woolich Racing MapShare allows you to share and download tuned maps for 2008 Yamaha YZF-R1 ECU Flashing. Also you guys with suzukis may want to note they can reflash your ecu for 150 as apposed to most places that charge 3-500. When you take the dive and get into tuning you will learn more about limitations and benifits. (Edited) I dont think many people know about it yet,kinda makes buying a power commander or even a race ecu pointless.That said, options for tunes are beginning to come to market. Id personally take that with a grain of salt though. The only thing that stops working is the kickstand saftey switch (I just removed it) and the headlights come on as soon as you turn the key on rather than after you start the bike. Haha, you'll fit right in with most of the guys here. Yamaha says you dont need a tune for a 2020+ r1. One that is identical to the YEC and one that offers everything the YEC does but allows you to keep the function of all the lights and standard gauge setup. The best part is the guy that does them offers them in 2 versions. I just got a ecu that was reflashed to yec specs! Works perfectly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |